New Holland T6.180 Remap

We Recently had this New Holland T6.180 Tier 5 on our Dimsport PTO Dyno

The Tier 5 New holland Tractors are fitted with the latest MD1 ECU’s, Thank to constant investment and genuine tooling, we can safely tune these via the OBD port.

First up? As always, we carried out a full diagnostic health check using our Texa Diagnostics, this ensures the New Holland has no faults before we proceed with some Dyno runs.

This T6.180 was down a bit on stock numbers.

Stock off boost – 135hp

Stock on boost – 156hp

It’s not unusual to find that certain tractors don’t make stock power when we test on them on the dyno.

Once we had the base runs and data logs we were able to apply a tune to the ECU.

Tuned Figures

177hp – Off Boost

205hp – On Boost

(See dyno graph below)

What is the process of New Holland T6.180 Tier 5 Dyno Remapping?

We travelled to the Port Talbot to carry out our Tractor Dyno remap on this New Holland T6.180

When we arrive on site we carry out the following.

Visual inspection
Fluid level check
Warm the New Holland up
Full diagnostic health check
Full fault code scan
Connect the Dimsport Dyno
Run the PTO at low speed with a small amount of load on
Run the New Holland standard – OFF BOOST
Run the New Holland standard – ON BOOST
Monitor live data
Take a read of the engine ECU (EDC7)
Modify the MAP Data
Rewrite the ECU
Warm the PTO back up
Run the New Holland tuned – OFF BOOST
Run the New Holland tuned – ON BOOST
Monitor live data
Discuss results with customer (very happy)
Uncouple tractor & road test

As you can see, West Wales Tuning carry out a very comprehensive service when tuning tractors.

We offer this service on all makes and models of tractors. If your tractor would benefit from improved performance, feel free to get in contact if you have any questions about Tuning your Tractor CONTACT US.

You can find out more about our Tractor Remapping HERE

You can find out more about our Tractor AdBlue Delete HERE